Petro Mold Company |
|
|
Supplies by Mayco General Directions: Begin with properly cleaned and fired 06 bisque. Thin down White and apply over entire piece to get into all detail. When dry, apply another smooth coat of undiluted White. When dry, apply Hyacinth Blue in small areas wiping back for highlights until entire piece is covered. Dampen a soft cloth with Solvent to wipe back highlights for an overall even look to antiquing. Spray with Porcelain Mist to set TL. Technique:
Mustang: Apply 2 coats of Holiday Red to body of car. Spray. Lightly drybrush with Christmas Red then tip into Orange to highlight. GTO: Apply 3 coats of Tangelo to body of car. Spray. Drybrush with Orange then tip into Brightest Yellow to highlight. Paint detail stripe with Flat Black. Impala: Apply 2 coats of Olive Green to body of car. Spray. Lightly drybrush with Artichoke then tip into Glorious Gold to highlight and add shimmer Camaro: Apply 4 coats of Hyacinth Blue to body of car. Spray. Lightly drybrush with Ice Blue. Paint stripes with White. When stripes are straight and even, paint with Metallic White. Evenly spray top and bottom of each car with Gloss Sealer. Allow to thoroughly dry before touching so as to not leave fingerprints.
|
|
Contact Us Toll Free - US / Canada: 888-811-6653 Send email to
petro@velocity.net with
questions or comments about this web site.
|