Toy
Store
Toy Store -
9 x 6 x 4" - $79.98
Supplies by Mayco
SS-19 Country Sage SS-133
Eggshell SS-500 Regal Purple
SS-23 Mink SS-135
White TL-4 Black
SS-28 Hushed Violet SS-138 Flat
Black TL-7
Forest Green
SS-57 Accent Green SS-272 Yellow
Green TL-113 Hyacinth Blue
SS-80 Glorious Gold SS-356 Wedgewood Blue
TL-119 Gold Doe Skin
SS-89 Copper SS-368 Dusty Violet
TL-137 Bay Blue
SS-108 Light Gray SS-373 Brick
Red AC-516
Porcelain Mist
SS-125 Portrait SS-376 Limeburst
AC-520 Solvent
General Directions:
Begin with properly cleaned and fired
06 bisque. Thin down White and apply over entire piece to get into all detail.
When dry, apply another smooth coat of undiluted White. When dry, apply
Hyacinth Blue in small areas wiping back for highlights until entire piece is
covered. Dampen a soft cloth with Solvent to wipe back highlights for an
overall even look to antiquing. Spray with Porcelain Mist to set TL.
Technique
1.
Use Black TL on sidewalk and cobblestones. Wipe back highlights; spray.
If needed, apply a second coat to achieve a dark gray value; spray. Lightly
drybrush sidewalk with Light Gray to make it look like a heavier “walk path.”
Randomly drybrush cobblestones with Light Gray, Brick Red, Wedgewood Blue and
Mink.
2.
Apply Bay Blue to all roof areas, eaves, center details of windows, rear
door, column bases, sign trim- including on front of building, round window
frames on ends of building and top detail of round window in rear. Wipe back
detail on roof areas. Spray. Apply a second coat to roof areas; wipe detail
and spray.
3.
Lightly drybrush all roof areas with Wedgewood Blue, then tip into White
to further highlight. Drybrush the remaining blue areas with Regal Purple to
achieve an even tone. With the same brush, tip into Dusty Violet to add
highlights, then into Hushed Violet to further highlight. Paint the trim on the
back door with Hushed Violet.
4.
Use 2 even coats of Gold Doe Skin for brick on body of the building.
Wipe back highlights on building between coats and spraying. Lightly drybrush
highlights with Portrait then tip into Eggshell to further highlight.
5.
Apply 3 coats of Forest Green to flat edges of windows, front door and
detail above square windows. Even out green value by lightly drybrushing with
Accent Green then tip into Country Sage to highlight. Tip into Limeburst to add
final twinkle. Paint trim on front door with Yellow Green.
6.
Lightly drybrush all remaining window frames and details above round
windows on ends with Eggshell, then paint frames with White. Lightly drybrush
details on ends with White.
7.
Paint the turret tops, door handles and detail, and dash details in
window frames with Flat Black. Spray. Add metallic details as desired with
Copper and Glorious Gold. Paint sign as desired with Flat Black.
